CE marked infusion pump JSB-1200

infusion pump,CE & ISO13485 approved,fit IV sets of any Brand Automatical calibration for IV sets of any Brand.Three work mode  ·        Range of capablites from home care application to critical car·         Runs from 1ml/hr upto 1200ml/hr, and runs a 1ml/hr KVO at dose end·         Capable of running parenteral (blood) and non-parental (enteral) fluids, and may use standard fulfill, partfill, syringe, and vial containers.SPECIFICATIONS Controls: Drop counting and adjusting the delivery rate automaticallyPump Type: Peristaltic fingerApplicable IV Sets:Compatible with IV sets of any standard(including lucifugal IV sets)Accuracy: ≤25drop/min:±2%, >25drop/min:±3% (With the drop counting control mode) ±5% (With the rate control mode after the correct calibration)Delivery Rate Range: 1400drop/min(1drop/min step)1.0ml/h1200ml/h (1.0ml/h99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step)Delivery Time Range: 1min1999min (1 min step)Volume Limit Range: 09999ml (1 ml step)Total Volume Range: 19999ml (1 ml step)

Rapid injection: 600ml/h

KVO Rate: W hen the delivery rate≤10ml/h, KVO is  1 ml/h .   Otherwise KVO is 3ml/h. Alarms: Air-in-line, Infusion complete when limited volume has been set, Empty container, Occlusion, Door is open, waitting time Over, No drop been detected, Operational errors, Low battery, other device failures.Power Supply: AC power supply: AC 100 to 240V±10%,50/60HzInternal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.Power Consumption: ≤25VASafety level: Class, Type BFDimensions: 130mm(L)× 200mm(W) × 230mm(H)Net Weight: Approximately. 2.5kgOperating Conditions: Ambient temperature: 5 to 40Relative humidity: 20 to 90%Storage Conditions: Ambient temperature: -10 to 55Relative humidity: 10 to 90%Accessories: AC power line, Operational manualDrop sensor

CE marked infusion pump JSB-1200